MIKE 21 og MIKE 3 – verdens ledende modelleringspakker når det gjelder 2D/3D overflateavrenning, bølger, sedimenttransport, morfologi og miljøprosesser – inneholder mange spennende, nye funksjoner i 2008 versjonen. Nye hovedfunksjoner er:

• Muligheten for parallellprosessering (Flexible Mesh).
• Støtte for strukturer som overløp, kanaler, kulverter, moloer og turbiner.
• Generering av finmasket grid bestående av både triangulære og rektangulære elementer (Flexible Mesh ).
• Hurtig visning av data i Tool Explorer.
• Visualisering av flexible mesh data filer i Plot Composer.
• Mange, nye og mer brukervennlige funksjoner i Project Explorer.
• Enklere behandling og administrasjon av resultatdata fra modeller.
• Nye og viktige funksjoner i Data Manager, som støtte for dfs2/dfs3, uthenting av data, etc.

For mer detaljert informasjon, klikk her.

Versjon 2008 av MIKE FLOOD inneholder mange nye funksjoner spesielt når det gjelder brukervennlighet og hastighet. Listen over nye funksjoner i MIKE FLOOD inkluderer:

• Muligheten for parallellprosessering (MIKE 21 FM).
• Støtte for overløp og kulverter (MIKE 21 Single Grid og FM).
• Generering av finmasket grid bestående av både triangulære og rektangulære elementer (Flexile Mesh).
• Hurtig visning av data i Tool Explorer.
• Visualisering av flexible mesh data filer i Plot Composer.
• Mange, nye og mer brukervennlige funksjoner i Project Explorer.
• Enklere behandling og administrasjon av resultatdata fra modeller.
• Nye og viktige funksjoner i Data Manager, som støtte for dfs2/dfs3, uthenting av data, etc.

For mer detaljert informasjon, klikk her.

Versjon 2008 av MIKE URBAN inneholder ny funksjonalitet spesielt i forhold til brukervennlighet og arbeidsflyt. Listen over nye funksjoner i MIKE URBAN inkluderer:

• Støtte for ArcGIS 9.2, inklusive geodatabasen på filformat.
• Mulighet for flere brukere. Støtte for Workgroup og Enterprise SDE.
• Betydelig forbedret ytelse, spesielt på store datasett – raskere kartlegging, raskere dataoperasjoner.
• Integrert Temporal Analyst for administrasjon, analyser og visning av tidsseriedata.
• Geometri- og hydrologiparametre samlet i ett vindu i den nye dialogboksen for nedslagsfelt.
• Nye verktøy for å utarbeide, koble og beregne parametre for nedslagsfelt.
• Nye muligheter i lengdeprofilet for grafisk editering, tilpassing av tabellen, visning av raster data, synkronisering med tabell.

For mer detaljert informasjon, klikk her.

Versjon 2008 programvarepakker for vannressurser og grunnvann inneholder mange nye funksjoner som øker bruksområdet og brukervennligheten til disse produktene betydelig. Nye funksjoner inkluderer:

 

MIKE 11:

• Mulighet for å benytte ArcMAP for å beregne forskjellen i resultatet mellom to simuleringer (MIKE 11 GIS);
• Link mellom punktkilde lag i ArcMAP og point pollutant loads i MIKE 11 (MIKE 11 GIS);
• Mange, nye og mer brukervennlige funksjoner i Project Explorer ;
• Enklere behandling og administrasjon av resultatdata fra modeller;

MIKE SHE:

• Mulighet for simulering av vannkvalitet gjennom hele det hydrologiske kretsløp – fra overflateavrenning til umettet strømning til mettet strømning til kanalstrømning – inkludert avansert transport og nedbryting av løst materiale;
• En forbedret, distribuert overflateavrenningsmodell med høydekorreksjon av nedbørsdata og en rigorøs snølagring- og snøsmeltemodul;
• Forbedringer i modulen Unsaturated Zone (UZ), med en fysisk basert macro pore modell;
• En rekke forbedringer i brukergrensesnittet, som sammenstilling av klima inngangsdata og bedre tilgang til og visning av forhåndsbehandlede data;

MIKE BASIN:

• Nye, unike muligheter for presentasjon av tilpassede grafer og tabeller til hjelp ved analyse av resultater;
• Omfattende muligheter for statistisk analyse av modellresultater;
• Ny opsjon for tilpasset visning av MIKE BASIN-funksjoner etter type og kategori;
• Dynamisk beregning av vannbehov for jordbruk og avling avkastning (Basert på FAO56/33, med flere tillegg).

For mer detaljert informasjon om de mange nye funksjonene, klikk her.

The software concept for the on-line modelling of water supply and water distribution systems has been extended to an on-line forecasting of flows and pressures and on-line scheduling of system elements through the SCADA system. The control system simulator based on URBAN ON-LINE WD makes the same control decisions as the real control system would make under the same circumstances. For example, set an initial start up of pumps, adjust a flow set point and the hydraulic simulator will automatically simulate the results of such control decisions, and thereby predict the behaviour of the pipeline system. This prediction can be done for the next hours or days, e.g. next 3 hours, next 1 day, or next 3 days. Demand prediction tool has been developed in order to evaluate historical data and create an estimate for the future water consumption, based on the current conditions as well as historical trends; each demand type such as residential, commercial, industrial, irrigation, etc. can be handled differently. Once the simulation results are validated by system dispatchers, the new operating plans are sent to the SCADA system, where they are used by the automatic scheduling of valves, pumps, and other control elements.

Illustration: Predicted water levels are displayed along with the low and high alarm levels

This concept has been developed and implemented for Phase III of The Great Man Made River project in Libya and in coordination by DHI and Coyne & Bellier.

For further information please Petr Ingeduld at p.ingeduld@dhigroup.com

FEFLOW was the subject of the Software Spotlight feature in the latest Groundwater Journal [45 (2007)5, 525-528]. Capability, robustness, ease of use, and quality of the technical support were evaluated. In all categories FEFLOW was rated at least ‘4’ on a scale of ‘1’ to ‘5’ (best). In particular, the technical support scored a full ‘5’. The current level of recognition is both motivation and challenge to maintain the high standard for future FEFLOW versions.

In cases of accidents or other disastrous events local Fire Brigades or Emergency Management Authorities must prevent, limit, and relieve damages to persons, properties and the environment within the shortest possible time. Important decisions may often be taken under uncertainty as readily available information about the area and the magnitude of the disaster may be incomplete.

GeoFES is a powerful instrument that can support the decision making both during operations and in connection with pre- and post evaluation of accidents by operational personal as well as administrative and managerial staff. Based on GIS technology GeoFES combines spatial (raster and vector data) and nonspatial data linked to data tables that contain detailed attribute information, e.g. contact details to offices, schools, hospitals etc.

See the full article here.

If you want to compare simulation results between different alternatives of your project, you can use one of the standard result presentation options, which are available by selecting “Results” from the main menu and then by selecting “Results Comparison”. This will display load result file dialog from which you select the first and then second result file. Both result files will be subtracted from each other and the differences will be displayed in the same manner as any regular results. It is therefore possible to create thematic maps, time series, profile plots, and result animation.

Requires MIKE URBAN 2005 or later

A number of papers, links to peer-reviewed papers, manuscripts and other documents are now available here. A number of The publications cover a wide range; from scientific applications using MIKE by DHI, discussion of new methodologies and innovations, model validation, case studies to practical guidelines.

The reason for this project was the flood disaster in august 2002 along the river Elbe. This event is classified as the highest ever calendared flood of the river Elbe in the Czech Republic and Saxony. In the federal states downstream of Saxony the flood dimension became more alleviate due to the opening of weirs, the use of the Lower Havel polders as an additional retention area as well as dike failures along the Elbe itself. The controlled flooding of the Lower Havel area during the flood disaster in 2002 clearly showed its particular importance for the reduction of extreme flood events for downstream areas.

See the full article here.

WASY has over the last ten years, in close cooperation with the Berlin Fire Brigades, developed the GeoFES package, which supports the decision making in the emergency assistance, in connection with specific disasters, or prevention of possible disasters at major national events like the FIFA World Cup in soccer in 2006.

For the city of Berlin, Germany’s capital and largest city, fast access to complex information of all useful data by the chief officers is essential. Successful emergency response requires stable, efficient and user-friendly software, and GeoFES is continuously improved through project experience.

See the full article here.

2nd DHI Streamlines Seminar

DHI invites you to attend our Streamlines seminars. This annual event has been extremely popular in the past with over 100 engineers, scientists and modellers attending. The seminar will showcase the new developments in the 2008 MIKE release and provide you with insight into the future direction of DHI Software.

The seminar program will include presentations covering our 3 product areas: Urban, Water Resources and Marine.

Presenters:
The seminar presenters will include members of DHI's expert software design and operational team. They all have comprehensive knowledge of DHI software through practical applications to real world case studies. They will present new and upcoming features that will improve your efficiency when working with DHI Software.

Guest Speaker:
The international presenter is Mr. Morten Rungø - sales executive for urban software. Morten is based at DHI's headquarters in Denmark and has more than 20 years of experience with DHI. He is now responsible for the urban software sales and directions of the urban software developments.

There will be an opportunity for questions, networking with DHI staff and other DHI Software users whilst enjoying the complementary refreshments after the presentations.

Venue and time:

Sydney, Australia:
Date: 20 November 2007
Time: Commencing at 3.30 pm followed by refreshments around 5.15 pm
Venue: TBA

Brisbane, Australia:
Date: 22 November 2007
Time: Commencing at 3.30 pm followed by refreshments around 5.15 pm
Venue: Customs House, The Lady Thiess Room

5th Asia – Pacific DHI Software Conference, March 16-18, 2008, Auckland, New Zealand

DHI is pleased to announce that our 5th Asia-Pacific Software Conference will be held in Auckland between 16-18 March 2008.

DHI Software Conferences are the perfect venue for learning about real-world applications of DHI Software and for exchanging experiences with your industry colleagues and DHI experts within the fields of marine, water resources, urban and environmental modelling.

Building upon the four successful conferences in Bangkok 2002, Sydney 2003, Kuala Lumpur 2005 and Shanghai 2007, the Auckland Conference will put even more emphasis on practical applications of the MIKE products by DHI.

Free training sessions will be held as part of the conference programme for the participants. See our conference website here for further details of the training programme.

Auckland, New Zealand
Imagine an urban environment where everyone lives within half an hour of beautiful beaches, hiking trails and a dozen enchanted holiday islands including Waiheke and Great Barrier Islands. Auckland is indeed an amazing city, boasting three harbours, two mountain ranges, 48 volcanic cones and more than 50 islands. Auckland’s population is approximately 1.3 million, making it by far the largest city in New Zealand. Auckland is also the largest Polynesian city in the world, and South Pacific influences are evident everywhere.

Aucklandin March
March is the end of summer in Auckland. The city experiences mild to warm temperatures with an average temperature of 24 degrees during the day and 18 degrees in the evening. Average rainfall is 81 mm in the month, with 11 rainy days.

Call for User Presentations / Papers
If you are interested in making a presentation at the conference, please submit an abstract (max 500 words) to the conference secretariat at Auckland2008@dhigroup.com. Deadline for abstracts is 1st September 2007.

Please see our Conference Website for further information.

2nd European DHI Software Conference, 9-11 June 2008, Split, Croatia

Water Across Europe

DHI has developed a strong and successful tradition for regional DHI Software Conferences: Bangkok and Orlando in 2002, Sydney, Prague and San Francisco in 2003, St. Pete Beach and Kuala Lumpur in 2005, Shanghai in 2006 and upcoming Auckland in March 2008.

Year 2008 marks an important milestone in our history of regional conferences: "Water Across Europe" will be the 10th regional DHI Software Conference.

DHI Software Conferences are the perfect venue for learning about real-world applications of our software and for exchanging experiences with your industry colleagues and DHI experts within the fields of marine, water resources, urban and environmental modelling.  Building upon our previous conferences the Croatia Conference will put even more emphasis on practical applications of the MIKE products by DHI - including free training sessions.

The Conference language is English and is arranged by DHI, Proning DHI and Proneko (DHI's technical support service and software agent in Croatia). 

Conference Main Themes

• Water Resources Management and Planning
• Flood Management and Control
• Urban Water Management
• Environmental Modelling
• Coastal and Marine Water & Environment

Call for Abstracts

We invite users who are interested in sharing their modelling experiences and know-how with fellow colleagues to submit abstracts (max 500 words) in English and in MS format no later than 21 December 2007 by email to: croatia2008@dhigroup.com and croatia2008@proneko.hr

Abstracts should include:

• Title (and subtitle)
• Authors (please specify designated contact author)
• Company/Organisation of authors
• Key words

Further Information

Please visit the official Conference website or contact Ms Susanne Kallemose, DHI  Denmark at croatia2008@dhigroup.com, or Ms Natasa Milidrag, Proneko & Proning DHI, Croatia at croatia2008@proneko.hr

Deadlines

21 December 2007: Submission of abstracts
18 January 2008: Early bird registration